86 755 2523 4088
service@agccert.com
In recent years, frequent battery safety accidents around the world have aroused concerns about battery safety in the international market; at the same time, market regulators in various countries have also stepped up spot checks on the quality of battery products, making domestic battery manufacturers face the challenge of improving product quality .
1. Common battery classification
Fuel cells Fuel electricity, dry batteries, mobile phone lithium batteries, button batteries, notebook computers
Batteries, lithium-ion batteries, import and export storage batteries, lithium-ion batteries for cellular phones, portable lithium secondary cells, nickel-metal hydride batteries, nickel-cadmium batteries
2. Standards and regulatory requirements
IEC 62133 Safety Standards for Portable Secondary Cells and Batteries, IEC 61960 Performance Standards for Portable Secondary Cells and Batteries, UN 38.3 Revision 1 & Revision 2 of Clause 38.3 of the Fifth Edition of the United Nations Manual of Tests and Standards for the Transport of Dangerous Goods, ANSI C18. 2 Safety Standards for Portable Secondary Cells and Batteries, GB/T 18287 General Specifications for Lithium-ion Batteries and Battery Packs for Mobile Phones, IEEE 1725 Standards for Rechargeable Batteries for Mobile Phones, IEC 62281 Transport Safety for Primary and Secondary Lithium Batteries, IEC 60086 -4 Safety Standards for Primary Lithium Batteries, IEC 61951-1 Portable Rechargeable Batteries-Ni-Cd Batteries, IEC 61951-2 Portable Rechargeable Batteries-Ni-MH Batteries, UL 1642 Lithium Batteries, UL 2054 Household and Commercial Batteries
3. Testing items
1. Environmental adaptability test
Low air pressure, temperature cycling, stress relief, washing, constant heat and humidity, storage properties,Vibration, acceleration shock, drop, stress test, other tests.
2. Electrical performance test
Capacity test, normal temperature discharge, high temperature discharge, low temperature discharge, low rate continuous charge,Cycle life, effective output capacity, conversion efficiency, rate discharge, charge retention and recovery capacity, and other tests.
3. Safety protection performance test
Thermal abuse, crushing, heavy impact, combustion injection, external short circuit, forced internal short circuit,Overcharge, overdischarge, overload, ESD (electrostatic discharge) test, abnormal charge, excessive charge,Forced discharge, acupuncture, high voltage resistance, and other tests.
The Erp Regulation (EU) 2019/2021 came into force on Decembe...
Recently, the two major international transport organization...
At present, all kinds of electronic products that are indisp...
New energy vehicles is the car to use the power source which...
In recent years, energy storage and power battery technologi...
Does the article solve your problem